application
1. Screen printing adhesive
2. Membrane lamination
3. Adhesive, adhesion promoter
Features
1. Suitable ink binder
2. Excellent adhesion
3. FDA certified CFR 175; 175.300 and 176.170
performance
|
parameter |
unit |
Numerical value |
|
Exterior |
— |
particles |
|
molecular weight |
— |
21,000 |
|
Viscosity |
dL/g |
0.62 |
|
glass transition temperature |
℃ |
65 |
|
Softening Point |
℃ |
140 |
|
Acid value |
KOH mg/g |
小于3 |
|
OH value |
KOH mg/g |
2~5 |
|
Tensile Strength |
kg/cm² |
720 |
Dissolution method
1. Put all the solvent in the reactor.
2. While stirring, place ES-100 solids into the reactor.
3. After adding all the components, raise the temperature of the reactor to 90~100 degrees. If MEK and acetone are used, the reactor temperature rises to 50-60 degrees. Stir for two hours. Reactor maximum pressure: 2kg/cm²
4. Turn off the heating system. Stirring was continued for one and a half hours and the reactor was allowed to cool naturally.
5. Stop stirring, filter the solution, and put it into a 200kg bucket.
solvent used
MEK, Toluene, Xylene, SOLVESSO, Cyclohexanone, Cellulose Acetate, Isophorone, DBE
Package
25kg/bag; 14MT/FCL