product description
TEGO Wet KL 245 works well with water-based and solvent-based formulations, especially plastic substrates, very compatible
Application Suggestions
|
Substrate wetting |
5 |
|
Anti-crater effect |
4 |
|
flow boost |
3 |
|
low foam |
0 |
Note: 0=Not applicable 5=Highly applicable
suitability
|
project |
Typical data |
|
waterborne |
Suitable for |
|
solvent type |
Suitable for |
|
Two-component type 100% |
not applicable |
|
radiation curing |
Suitable for |
|
clear paint |
Suitable for |
|
pigmented |
Suitable for |
Self-drying (transparent) paint
|
Primer / Primer |
Suitable for |
|
topcoat |
Suitable for |
Solubility
|
water |
Suitable for |
|
Ethanol |
Suitable for |
|
Tripropylene glycol diacrylate |
Suitable for |
|
Butyl acetate |
Suitable for |
|
Petroleum solvent |
not applicable |
Recommended dosage
Calculated according to the total formula based on the original product: 0.1-1.0%
Instructions for use
Can be added as original or pre-diluted
Recommended to be added in the second half
recipe suggestion
Low-foaming Substrate Wetting Alternative: TEGO Foamax 4100
chemical structure
polyether siloxane copolymer
technical parameter
|
project |
Typical data |
|
Exterior |
Transparent liquid (the temperature will become turbid and thickened when the temperature is lower than 15℃, and the transparency and operability will be restored after heating) |
|
Active ingredient |
100% |
storage security
When stored in the original unopened packaging, between -40 and +40°C, the shelf life of this product is at least 48 months from the date of manufacture.
Package
25kg plastic drum, 200kg plastic drum